As seen on H.G.T.V.'s show "Designer's Challenge".
We use 2" square tubing with radiused corners on our CTP-200 base.
Each corner is mitered then welded and the welds are then ground down smooth
for a seemless appearance. The base is then highly polished for a mirror like
finish. For a satin finish the satining is vertical on the legs and horizontal
on the apron. The two finishes meet on the diagonal at each mitered corner.
"Designer's Challenge"
Two of our CTP-200 bases were
fabricated using 2-1/2" square tubing
and satin finished. These bases were used for a dining table in a great room
designed by Estelle Jaivin, ASID, CCIDC and shown on H.G.T.V.’s show
Designer’s Challenge of which Master Metal Works was featured, showing
the processes required to fabricate the bases.
CTP-200 with Metal Top
|
Finish Options for CTP-200
Matte Black, Polished or Satin Stainless Steel, Polished, Satin or Antique
Brass/Bronze
| Square |
|
Rectangular |
| Size Options: |
|
For Top Size |
|
Size Options: |
|
For Top Size |
| 18” sq |
|
30” sq |
|
24" x 30” |
|
36" x 42" |
| 24” sq |
|
36” sq |
|
20" x 60" |
|
32" x 72" |
| 30” sq |
|
42” sq |
|
20" x 72" |
|
32" x 84" |
| 36” sq |
|
48” sq |
|
24" x 60" |
|
36" x 72" |
| 42" sq |
|
54” sq |
|
24" x 72" |
|
36" x 84" |
|
Overall Height 16” to 27”
|
|
Overall Height 21” to 27”
|
|
